Cisco 220 Series Smart Plus Reference Manual page 132

Clock Commands
sntp server
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
port-number
• port
the SNTP client on the switch. The default is the well-known IANA port
number for this service, 123. (Range: 1 to 65535)
Default Configuration
No SNTP servers are defined.
Command Mode
Global Configuration mode
Example
The following example configures the switch to accept SNTP traffic from the
server on 192.1.1.1 with port 123:
switchxxxxxx(config)# sntp server 192.1.1.1 port 123
—(Optional) Specifies the logical port number used for
8
130