Ipv6 Mld Snooping Vlan Static Interface - Cisco 220 Series Smart Plus Reference Manual

IPv6 MLD Snooping Commands

ipv6 mld snooping vlan static interface

ipv6 mld snooping vlan static interface
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx(config)# ipv6 mld snooping vlan 7 robustness-variable 5
To enable the MLD snooping static group processing on a VLAN, use the ipv6 mld
snooping vlan static interface Global Configuration mode command.
To disable this feature on the VLAN, use the no form of this command.
Syntax
ipv6 mld snooping vlan
no ipv6 mld snooping vlan
Parameters
VLAN-LIST
• —A VLAN ID or a list of VLAN IDs.
IPv6-Addr
• —The IPv6 multicast address.
interface-id—
• The interface ID, which can be one of these types: Ethernet
port or port channel.
Default Configuration
No ports are configured as a member of a multicast group.
Command Mode
Global configuration mode
User Guidelines
You can execute the command before the VLAN is created.
Using the no command without a port list removes the entry.
Example
switchxxxxxx(config)# ipv6 mld snooping vlan 1 static abcd::1234 interface
fa1
switchxxxxxx(config)# ipv6 mld snooping vlan 1 static abcd::1234 interface
gi1
VLAN-LIST IPv6-Addr
static
VLAN-LIST IPv6-Addr
static
19
interface-id
interface
interface-id
interface
291