Table of Contents
Advertisement
VLAN Commands
management-vlan
management-vlan
show interfaces protected-ports
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To set a VLAN as the management VLAN, use the management-vlan Global
Configuration command.
Syntax
management-vlan vlan
Parameters
vlan-id
•
vlan
—Specifies the VLAN ID as the management VLAN.
Default Configuration
The default management VLAN is VLAN 1.
Command Mode
Global Configuration mode
Example
witchxxxxxx(config)# management-vlan vlan 2
To show information for the protected ports, use the show interfaces protected-
ports Privileged EXEC mode command.
Syntax
show interfaces protected-ports
Parameters
interface-id
•
—Specifies an interface ID or a list of interface IDs. The
interface can be one of these types: Ethernet port or port channel.
Default Configuration
N/A
vlan-id
interface-id
41
502
Advertisement
Table of Contents
