Table of Contents
Advertisement
IGMP Snooping Commands
ip igmp snooping vlan response-time
ip igmp snooping vlan response-time
ip igmp snooping vlan robustness-variable
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To configure the maximum query response time on a VLAN, use the ip igmp
snooping vlan response-time Global Configuration mode command.
To revert to its default setting, use the no form of this command.
Syntax
ip igmp snooping vlan
no ip igmp snooping vlan
Parameters
VLAN-LIST
•
—A VLAN ID or a list of VLAN IDs. (Range: 1 to 4094)
•
seconds
—Maximum response time in seconds advertised in IGMP queries.
(Range: 5 to 20)
Default Configuration
10
Command Mode
Global Configuration mode
User Guidelines
You can execute the command before the VLAN is created.
Example
switchxxxxxx(config)# ip igmp snooping vlan 3 response-time 20
To set the IGMP robustness variable on a VLAN, use the ip igmp snooping vlan
robustness-variable Global Configuration mode command.
To revert to its default setting, use the no form of this command.
VLAN-LIST
response-time
VLAN-LIST
response-time
seconds
13
212
Advertisement
Table of Contents
