Chapter 40: Voice Vlan Commands; Show Voice Vlan - Cisco 220 Series Smart Plus Reference Manual

Voice VLAN Commands

show voice vlan

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the voice VLAN status for all interfaces or for a specific interface, use the
show voice vlan Privileged EXEC mode command.
Syntax
show voice vlan [type {auto | oui}] [interfaces
Parameters
• type auto—(Optional) Displays common and specific Auto-voice-VLAN
parameters.
• type oui—(Optional) Displays common and specific OUI-voice-VLAN
parameters.
interface-id
• interface
of Ethernet interface IDs (Relevant only for the OUI type).
Default Configuration
If the type keyword is not specified, the current voice VLAN type is used.
interface-id
If the parameter is not specified, the information for all interfaces is
displayed.
Command Mode
Privileged EXEC mode
User Guidelines
Using this command without parameters displays the parameters of the current
voice VLAN type. Using this command with the type parameter displays the voice
VLAN parameters relevant to the type selected.
interface-id
The parameter is relevant only for the OUI voice VLAN type.
interface-id
—(Optional) Specifies an Ethernet interface ID or a list
40
]
490