LLDP Commands
show lldp statistics
show lldp statistics
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the LLDP statistics for specific interfaces, use the show lldp statistics
Privileged EXEC mode command.
Syntax
show lldp [interfaces
Parameters
•
interfaces
interface-id
interface IDs. If not specified, the command displays information for all
interfaces.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show lldp interfaces gi1-2 statistics
LLDP Port Statistics:
| TX Frames |
RX Ageouts
Port |
Total
| Total | Discarded | Errors | Discarded | Unrecognized |
Total
--------+-----------+-------+-----------+--------+-----------+--------------
+----------
gi1 |
0 |
0
gi2 |
0 |
0
The following table describes the significant fields shown in the example:
Field
Port
TX Frames Total
RX Frames Total
RX Frames Discarded
RX Frames Errors
interface-id
] statistics
—(Optional) Specifies an interface ID or a list of
RX Frames
0 |
0 |
0 |
0 |
Description
Identifier of interface.
Total number of transmitted frames.
Total number of received frames.
Total number of received frames that were discarded.
Total number of received frames with errors.
|
RX TLVs
0 |
0 |
0 |
0 |
22
|
0 |
0 |
343