Table of Contents
Advertisement
Configuration and Image File Commands
show ip dhcp tftp-server
show ip dhcp tftp-server
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
1
image-1
2
image-2
"*" designates that the image was selected for the next boot
To show information about the active and user-defined TFTP servers, use the
show ip dhcp tftp-server Privileged EXEC mode command.
Syntax
show ip dhcp tftp-server
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
The following example shows information of the TFTP servers used for auto
configuration through DHCP:
switchxxxxxx# show ip dhcp tftp-server
server address
active
manual
file path on server
active
manual
auto-install status:
Current server
Current file
1.0.0.14
2014-02-07 09:32:39
1.0.0.16
2014-02-26 16:02:49
9
Not active
Active*
146
Advertisement
Table of Contents
