Show Ip Igmp Filter - Cisco 220 Series Smart Plus Reference Manual

IGMP Snooping Commands

show ip igmp filter

show ip igmp filter
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx(config)# ip igmp profile 20
switchxxxxxx(config-igmp-profile)# profile range ip 225.0.0.0 225.0.0.255
action permit
To display IGMP profiles for all interfaces or a specific interface, use the show ip
igmp filter Privileged EXEC mode command.
Syntax
show ip igmp filter [interfaces
Parameters
interface-id
• interfaces
interface IDs.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ip igmp filter
Port ID | Profile ID
---------+--------------
fa1 : 1
fa2 : 1
fa3 : 2
fa4 : 2
fa5 : None
fa6 : None
fa7 : None
fa8 : None
fa9 : None
fa10 : None
fa11 : None
fa12 : None
fa13 : None
fa14 : None
fa15 : None
fa16 : None
fa17 : None
fa18 : None
fa19 : None
fa20 : None
interface-id
]
—(Optional) Specifies an interface ID or a list of
13
217