IP DHCP Snooping Commands
show ip dhcp snooping information option format remote-id
show ip dhcp snooping information option format remote-id
show ip dhcp snooping interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Successful Transfers :
Successful Reads
Successful Writes
To display the DHCP snooping option 82 format remote ID, use the show ip dhcp
snooping information option format remote-id Privileged EXEC mode command.
Syntax
show ip dhcp snooping information option format remote-id
Parameters
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ip dhcp snooping information option format remote-id
Remote ID: vlan-md-fa11
To display the DHCP snooping configuration for specific interfaces, use the show
ip dhcp snooping interfaces Privileged EXEC mode command.
Syntax
show ip dhcp snooping interfaces
Parameters
interface-id—
•
An interface ID or a list of interfaces. The interfaces can be
one of these types: Ethernet port or port channel.
0
Failed Transfers :
:
0
Failed Reads
:
0
Failed Writes
interface-id
0
:
0
:
0
16
261