Chapter 17: Ip Source Guard Commands; Ip Source Binding - Cisco 220 Series Smart Plus Reference Manual

IP Source Guard Commands

ip source binding

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To add a static IP source binding rule for all interfaces or for an interface, use the ip
source binding Global Configuration mode command.
To delete a static IP source binding rule for all interfaces or for an interface, use the
no form of this command.
Syntax
MAC-Addr
ip source binding
no ip source binding
Parameters
MAC-Addr
• —MAC address for IP source binding.
VLAN-LIST
• vlan
binding.
• IPv4-Addr —IP address for IP source binding.
interface-id
• interface
interfaces can be one of these types: Ethernet port or port channel.
Default Configuration
No IP source binding rule is configured.
Command Mode
Global Configuration mode
VLAN-LIST IPv4-Addr
vlan
MAC-Addr VLAN-LIST IPv4-Addr
vlan
—Specifies a VLAN ID or a range of VLAN IDs for IP source
—Specifies an interface ID or a list of interfaces. The
17
interface-id
interface
interface-id
interface
264