Table of Contents
Advertisement
IP Source Guard Commands
show ip verify source interfaces
show ip verify source interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Field
MAC Address
IP
Type
Lease Time
To show the IP source guard configuration for specific interfaces, use the show ip
verify source interfaces Privileged EXEC mode command.
Syntax
show ip verify source interfaces [
Parameters
interface-id—
•
(Optional) An interface ID or a list of interface IDs. The
interfaces can be one of these types: Ethernet port or port channel.
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ip verify source interfaces fa1-10
Port
|
Status
--------+----------------+-----------+---------------
fa1 |
disabled | No Limit
fa2 |
disabled | No Limit
fa3 |
disabled | No Limit
fa4 |
disabled | No Limit
fa5 |
disabled | No Limit
Description
MAC address of the interface.
IP address of the interface.
IP address type. The possible field values are:
•
Dynamic—Indicates that the IP address is
dynamically created.
•
Static—Indicates that the IP address is a static
IP address.
The amount of time that the IP address is active. IP
addresses whose lease times are expired are deleted
from the database.
interface-id
]
| Max Entry | Current Entry
|
1
|
0
|
0
|
0
|
0
17
268
Advertisement
Table of Contents
