Lldp Run - Cisco 220 Series Smart Plus Reference Manual

LLDP Commands

lldp run

lldp run
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Default Configuration
2 seconds
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# lldp reinit 4
To enable LLDP globally on the switch, use the lldp run Global Configuration mode
command.
To disable LLDP globally on the switch, use the no form of this command.
Syntax
lldp run
no lldp run
Parameters
N/A
Default Configuration
LLDP is enabled by default.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# lldp run
22
328