Table of Contents
Advertisement
Line Commands
clear line
exec-timeout
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To disconnect Telnet or SSH sessions, use the clear line Privileged EXEC Mode
command.
Syntax
clear line {ssh | telnet}
Parameters
•
ssh—Disconnects SSH sessions.
•
telnet—Disconnects Telnet sessions.
Default Configuration
N/A
Command Mode
Privileged EXEC Mode
Example
switchxxxxxx# clear line telnet
To set the session idle time, during which the switch waits for user input before
automatic logoff, use the exec-timeout Line Configuration mode command.
To revert to the default setting, use the no form of this command.
21
311
Advertisement
Table of Contents
