Chapter 7: Cdp Commands; Cdp Advertise-V2 - Cisco 220 Series Smart Plus Reference Manual

CDP Commands

cdp advertise-v2

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To use Cisco Discovery Protocol (CDP) version 2 for all transmitted CDP packets,
use the cdp advertise-v2 Global Configuration mode command.
To use CDP version 1, use the no form of this command.
Syntax
cdp advertise-v2
no cdp advertise-v2
Parameters
N/A
Default Configuration
CDP version 2 is used by default.
Command Mode
Global Configuration mode
Example
switchxxxxxx(config)# cdp run
switchxxxxxx(config)# cdp advertise-v2
7
103