Show Security-Suite Dos - Cisco 220 Series Smart Plus Reference Manual

Security DoS Commands

show security-suite dos

show security-suite dos
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show the DoS protection configuration, use the show security-suite dos
Privileged EXEC Mode command.
Syntax
show security-suite dos
Parameters
N/A
Command Mode
Privileged EXEC Mode
Example
switchxxxxxx# show security-suite dos
Type
----------------------------+---------------------------------
DMAC equal to SMAC
Land (DIP = SIP)
UDP Blat (DPORT = SPORT)
TCP Blat (DPORT = SPORT)
POD (Ping of Death)
IPv6 Min Fragment Size
ICMP Fragment Packets
IPv4 Ping Max Packet Size | enabled
IPv6 Ping Max Packet Size | enabled
Smurf Attack
TCP Min Header Length
TCP Syn (SPORT < 1024)
Null Scan Attack
X-Mas Scan Attack
TCP SYN-FIN Attack
TCP SYN-RST Attack
TCP Fragment (Offset = 1) | enabled
| State (Length)
| enabled
| enabled
| enabled
| enabled
| enabled
| enabled (1000 Bytes)
| enabled
(512 Bytes)
(512 Bytes)
| enabled (Netmask Length: 0)
| enabled (20 Bytes)
| enabled
| enabled
| enabled
| enabled
| enabled
31
427