Disable - Cisco 220 Series Smart Plus Reference Manual

User Interface Commands

disable

disable
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
The following example executes the show vlan Privileged EXEC mode command
from the Global Configuration mode:
switchxxxxxx(config)# do show vlan
VID | VLAN Name
| Type
-------+------------------+------------------------------+------------------
------------+---------
1 | default |
--- | Default
To leave the Privileged EXEC mode and return to the User EXEC mode, use the
disable Privileged EXEC mode command.
Syntax
privilege-level
disable [
Parameters
• privilege-level
privilege level is left blank, the level is reduced to 1.
Default Configuration
The default privilege level is 1.
Command Mode
Privileged EXEC mode
Example
The following example returns the user to level 7:
switchxxxxxx# disable 7
switchxxxxxx>
| Untagged Ports
fa1-24,gi1-2,po1-8 |
]
—(Optional) The privilege level to be reduced to. If the
39
| Tagged Ports
481