Cisco 220 Series Smart Plus Reference Manual page 51

802.1X Commands
show dot1x interfaces
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
The following table describes the significant fields shown in the example:
Field
Port
Mode
Current State
Reauth Control
Reauth Period
Quiet Period
Supplicant timeout
Max req
Session Time
(HH:MM:SS)
Description
Port number.
802.1X port-based authentication mode.
Current port authorization state.
Shows that reauthentication is enabled or disabled on
the port.
Number of seconds after which the selected port is
reauthenticated.
Number of seconds that the switch remains in the quiet
state following a failed authentication exchange.
Number of seconds that lapses before EAP requests
are resent to the supplicant.
Maximum number of EAP requests that can be sent.
Amount of time that the supplicant was logged on the
port.
2
49