Show Mac Address-Table - Cisco 220 Series Smart Plus Reference Manual

Address Table Commands

show mac address-table

show mac address-table
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
01:80:C2:00:00:19
01:80:C2:00:00:1A
01:80:C2:00:00:1B
01:80:C2:00:00:1C
01:80:C2:00:00:1D
01:80:C2:00:00:1E
01:80:C2:00:00:1F
01:80:C2:00:00:20
01:80:C2:00:00:21
01:80:C2:00:00:22
01:80:C2:00:00:23
01:80:C2:00:00:24
01:80:C2:00:00:25
01:80:C2:00:00:26
01:80:C2:00:00:27
01:80:C2:00:00:28
01:80:C2:00:00:29
01:80:C2:00:00:2A
01:80:C2:00:00:2B
01:80:C2:00:00:2C
01:80:C2:00:00:2D
01:80:C2:00:00:2E
To show the entries in the MAC address table, use the show mac address-table
Privileged EXEC command.
Syntax
show mac address-table [dynamic | static] [interfaces
show mac address-table [
Parameters
• dynamic—(Optional) Displays only dynamic MAC addresses.
• static—(Optional) Displays only static MAC addresses.
interface-id
• interfaces
interface. The interface can be one of these types: Ethernet port or port
channel.
vlan
• vlan —(Optional) Displays the entries for a specific VLAN.
mac-address
• —(Optional) Entries for a specific MAC address.
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
| bridge
mac-address
] [vlan
—(Optional) Displays the entries for a specific
interface-id
] [vlan
vlan
]
5
vlan
]
94