Qos Cos; Qos Map Cos-Queue - Cisco 220 Series Smart Plus Reference Manual

QoS Commands

qos cos

qos cos

qos map cos-queue

Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To define the default CoS value for an interface, use the qos cos Interface
Configuration mode command.
Syntax
default-cos
qos cos
Parameters
• default-cos —The default CoS value (VPT value) of the interface. If the
interface is trusted and the packet is untagged, then the default CoS value
becomes the CoS value. (Range: 0 to 7)
Default Configuration
The default CoS value of an interface is 0.
Command Mode
Interface Configuration mode
User Guidelines
Use the default CoS value to assign a CoS value to all untagged packets entering
the interface.
Example
switchxxxxxx(config)# interface gi5
switchxxxxxx(config-if)# qos cos 5
To map assigned CoS values to an egress queue, use the qos map cos-queue
Global Configuration mode command.
Syntax
qos map cos-queue
cos0...cos7 queue-id
to
28
392