Table of Contents
Advertisement
QoS Commands
show class-map
show class-map
show policy-map
NOTE
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show information for all class maps or for a specific class map when the switch
is in QoS advanced mode, use the show class-map Privileged EXEC mode
command.
Syntax
class-map-name
show class-map [
Parameters
•
class-map-name
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show class-map class1
Class Map match-any class1 (id4)
Match IP dscp 11 21
To show information for all policy maps or for a specific policy map, use the show
policy-map Privileged EXEC mode command.
This command is available only when the switch is in QoS advanced mode.
Syntax
policy-map-name
show policy-map [
Parameters
policy-map-name
•
Default Configuration
N/A
]
—(Optional) The class map name.
]
—(Optional) The policy map name.
28
402
Advertisement
Table of Contents
