Table of Contents
Advertisement
IPv6 Addressing Commands
show ipv6
show ipv6
show ipv6 dhcp
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To display the IPv6 configuration of the switch, use the show ipv6 Privileged EXEC
mode command.
Syntax
show ipv6
Parameters
N/A
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ipv6
IPv6 DHCP Configuration
IPv6 DHCP DUID
IPv6 Auto Configuration
IPv6 Link Local Address
IPv6 static Address
IPv6 static Gateway Address : ::
IPv6 in use Address
To display the IPv6 DHCP parameters configured on the switch, use the show ipv6
dhcp Privileged EXEC mode command.
Syntax
show ipv6 dhcp
Parameters
N/A
: Disabled
:
: Enabled
: fe80::2e36:f8ff:fe4b:e227/64
: ::/0
: fe80::2e36:f8ff:fe4b:e227/64
18
274
Advertisement
Table of Contents
