Show Vlan - Cisco 220 Series Smart Plus Reference Manual

VLAN Commands

show vlan

show vlan
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
To show information for all VLANs or for a specific VLAN, use the show vlan
Privileged EXEC mode command.
Syntax
VLAN-LIST
show vlan [
VLAN-LIST
show vlan
Parameters
VLAN-LIST
• —(Optional) Displays information for a VLAN ID or a list of VLAN
IDs.
• dynamic—(Optional) Displays information for the dynamic created VLAN.
• static—(Optional) Displays information for the static VLAN.
interface-id
• interfaces
interface IDs. The interface ID can be one of these types: Ethernet port or
port channel.
Default Configuration
N/A
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show vlan 2-5
VID | VLAN Name
| Type
------+-----------------+------------------------+------------------------+-
--------
2 | VLAN0002 |
8 | Static
3 | VLAN0003 |
8 | Static
4 | VLAN0004 |
8 | Static
5 | VLAN0005 |
8 | Static
| dynamic | static]
interface-id
[interfaces
—(Optional) Specifies an interface ID or a list of
| Untagged Ports
membership]
| Tagged Ports
--- | fa1-24,gi1-2,po1-
--- | fa1-24,gi1-2,po1-
--- | fa1-24,gi1-2,po1-
--- | fa1-24,gi1-2,po1-
41
506