Table of Contents
Advertisement
Configuration and Image File Commands
show backup-config
show backup-config
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Example
switchxxxxxx# renew dhcp force-autoconfig
After auto config success, the original startup-config will be replaced and
system will reload.
Do you want to continue? (y/n)
To show information of the Backup Configuration file, use the show backup-config
Privileged EXEC mode command.
Syntax
show backup-config
Parameters
N/A
Command Mode
Privileged EXEC mode
User Guidelines
The Backup Configuration file does not contain all information that can be
displayed in the output. Only nondefault settings are displayed.
Example
switchxxxxxx# show backup-config
config-file-header
Switch867001
v1.0.0.16
CLI v1.0
@
!
!
!
!
username "cisco" secret encrypted
ZmZmNzVhZTAzYjAyODkzZjlkM2JjZGIyMGYyMzY0NDM=
!
!
9
142
Advertisement
Table of Contents
