Table of Contents
Advertisement
Web Server Commands
show ip http
show ip http
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
Parameters
minutes
•
—Maximum number of seconds that a connection is kept open if no
data is received or the response data cannot be sent out. (Range: 0 to
86400 seconds, 0 indicates no timeout)
•
http-only—(Optional) Specifies the timeout for HTTPS sessions only.
•
https-only—(Optional) Specifies the timeout for HTTPS sessions only.
Default Configuration
The default timeout for HTTP and HTTPS sessions is 10 seconds.
Command Mode
Global Configuration mode
User Guidelines
To specify no timeout, enter the ip http timeout-policy 0 command.
Example
The following example configures the HTTP timeout to 1000 seconds:
switchxxxxxx(config)# ip http timeout-policy 1000
To show the HTTP service information, use the show ip http Privileged EXEC
mode command.
Syntax
show ip http
Command Mode
Privileged EXEC mode
Example
switchxxxxxx# show ip http
42
473
Advertisement
Table of Contents
