Management Vlan Ipv6-Address-Dhcp - Cisco 220 Series Smart Plus Reference Manual

IPv6 Addressing Commands

management vlan ipv6-address-dhcp

management vlan ipv6-address-dhcp
Cisco 220 Series Smart Plus Switches Command Line Interface Reference Guide Release 1.0.0.x
switchxxxxxx(config)# management vlan ipv6-address-autoconfig
To acquire an IPv6 address on an interface from the DHCPv6 server, use the
management vlan ipv6-address-dhcp Global Configuration mode command.
To remove the IPv6 address from the interface, use the no form of this command.
Syntax
management vlan ipv6-address-dhcp
no management vlan ipv6-address-dhcp
Parameters
N/A
Default Configuration
N/A
Command Mode
Global Configuration mode
User Guidelines
The management vlan ipv6-address-dhcp Global Configuration command allows
the switch to dynamically learn its IPv6 address by using DHCP.
Example
switchxxxxxx(config)# management vlan ipv6-address-dhcp
18
273