Commands - Cisco NCS 1004 Command Reference Manual

Commands

• Reference, on page 3
• aaa authentication login, on page 4
• aaa authorization, on page 5
• active, on page 6
• address, on page 7
• cipher-suite, on page 8
• controller coherentDSP, on page 9
• controller HundredGigECtrlr, on page 11
• controller ODU4, on page 13
• controller optics, on page 15
• destination address, on page 19
• destination ipv4 unicast, on page 20
• destination transport-method, on page 21
• dh, on page 22
• dwdm-carrier, on page 23
• encryption, on page 24
• fault-profile, on page 25
• fault-profile apply, on page 27
• gmpls optical-uni, on page 28
• http-proxy, on page 29
• hw-module, on page 30
• ikev2 policy, on page 33
• ikev2 profile, on page 34
• ikev2 proposal, on page 35
• integrity, on page 36
• interface gcc0, on page 37
• interface gcc2, on page 38
• ipcc routed, on page 39
• ipv4 access-group, on page 40
• ipv6 access-group, on page 41
• keyring, on page 42
• license smart register, on page 43
• license smart renew , on page 44
Command Reference for Cisco NCS 1004
1