Unable To Verify The Ip Configuration Of Your Pc - Cisco NCS 2000 series Troubleshooting Manual

Hide thumbs Also See for NCS 2000 series:
Table of Contents

Advertisement

Unable to Verify the IP Configuration of Your PC

Area
Cable
Unable to Verify the IP Configuration of Your PC
Problem
PC to verify the IP configuration.
Solution
IP Configuration information retrieved from the system. See the
page
Solution
page
IP configuration of your PC.
Verify the IP Configuration of Your PC
SUMMARY STEPS
1. Open a DOS command window by selecting Start > Run from the Start menu.
2. In the Open field, type command and then click OK. The DOS command window appears.
3. At the prompt in the DOS window, type ipconfig and press the Enter key.
4. At the prompt in the DOS window, type ping followed by the IP address shown in the Windows IP
configuration information previously displayed.
5. Press the Enter key to execute the command.
DETAILED STEPS
Step 1
Open a DOS command window by selecting Start > Run from the Start menu.
Step 2
In the Open field, type command and then click OK. The DOS command window appears.
Step 3
At the prompt in the DOS window, type ipconfig and press the Enter key.
The Windows IP configuration information appears, including the IP address, the subnet mask, and the default gateway.
Cisco NCS 2000 series Troubleshooting Guide, Release 11.0
42
When connecting your PC to the system, you are unable to successfully ping the IP address of your
The IP address was entered incorrectly.
Possible Cause
Verify that the IP address used to ping the PC matches the IP address displayed when in the Windows
42.
The IP configuration of your PC is not properly set.
Possible Cause
Verify the IP configuration of your PC. Complete the
42. If this procedure is unsuccessful, contact your network administrator for instructions to correct the
Requirements
• User-supplied CAT-5
straight-through cable with
RJ-45 connectors on each end
to connect the computer to the
chassis directly or through a
LAN.
• User-supplied cross-over
CAT-5 cable to the DCN port
on the patch panel or to the
Catalyst 2950 (multishelf
mode)
Verify the IP Configuration of Your PC, on
General Troubleshooting
Notes
Verify the IP Configuration of Your PC, on

Advertisement

Table of Contents
loading

Table of Contents