Power Mirror Actuator Test - Honda 2004 Odyssey Service Manual

Power Mirrors

Power Mirror Actuator Test

1. Remove the door panel (see page 20-7).
2. Disconnect the 3P or 6P connector (A) from the
power mirror (B).
USA:
B
A
Canada:
B
A
22-184
3. Check actuator operation by connecting power and
ground according to the table.
Terminal
Position
TILT UP
TILT DOWN
SWING LEFT
SWING RIGHT
( ) : Canada
4. If the mirror fails to work properly, replace the
mirror actuator.
Defogger Test (Canada)
5. Check for continuity between the No. 1 and No. 2
terminals of the 6P connector. There should be
continuity.
6. If there is no continuity, replace the mirror.
2
1 3
(4) (5) (6)