Rmon Event Settings - D-Link DGS-3630 Series Reference Manual

DGS-3630 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

RMON Event Settings

This window is used to display and configure event entries.
To view the following window, click Management > RMON > RMON Event Settings, as shown below:
The fields that can be configured are described below:
Parameter
Index
Description
Type
Community
Owner
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
Click the View Logs button to see the detail information of the specific port.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the View Logs button, the following window will appear.
Figure 4-23 RMON Event Settings Window
Description
Enter the index value of the alarm entry here. The range is from 1 to 65535.
Enter a description for the RMON event entry. The string is up to 127
characters long.
Select the RMON event entry type. Options to choose from are None, Log,
Trap, and Log and Trap.
Enter the community string. The string can be up to 127 characters.
Enter the owner string. The string can be up to 127 characters.
Figure 4-24 RMON Event Settings (View Logs) Window
46