Ssh - Supermicro SSE-G24-TG4 User Manual

1/10 and 10-Gigabit Layer 2/3 Ethernet Switches User's Manual
Table 5-7. IP Authorized Manager Page Parameters
Parameter
Port List (Incoming)
VLANs Allowed
Services Allowed

SSH

Clicking the SSH (Secure Shell) tab brings up the SSH C
(Figure 5-13), which allows you to configure SSH version and keys. The parameters for
this page are shown in
Parameter
SSH Version
Description
This lists the port through which the manager can access this switch. Ports can
be comma separated or provided as a range (for example Gi0/1 or Ex0/1). The
factory default is blank.
This parameter specifies the VLANs through which the manager can access this
switch. VLANs can be comma separated or provided as range (for example 1,2,3
or 1-3 or 1,2-3).
These control buttons are used to indicate the service type, and can be one or
more of the following: T
Figure 5-13. SSH Configuration
Table 5-8.
Table 5-8. SSH Configuration Page Parameters
Description
The default for this parameter is v2. You can choose to configure this as
compatible with v1 instead.
, SSH, HTTP, HTTPS, SNMP or ALL.
ELNET
5-22
page
ONFIGURATION