Port Monitoring Display Keys; System Temperature - Extreme Networks ExtremeWare XOS Guide Manual

Port Monitoring Display Keys

Table 16 describes the keys used to control the displays that appear when you issue any of the
commands.
port
Table 16: Port monitoring display keys
Key(s)
U
D
[Esc] or [Return]
0
[Space]

System Temperature

You can view the temperature of the system and the I/O and management modules, in celsius, for the
BlackDiamond 10808 chassis.
To view the system temperature, use the following command:
show temperature
The following is sample output from this command:
Field Replaceable Units
-----------------------
Slot-1 : PCSimC2
Slot-2 : PCSimC2
Slot-3 : PCSimC2
Slot-4 : PCSimC2
Slot-5 : PCSimC256
Slot-6 : PCSimC256
Slot-7 : PCSimC256
Slot-8 :
MSM-A : PCSimMSM
MSM-B : PCSimMSM
You can also view the temperature of the power supplies and the fan tray. All temperatures are
displayed in celsius.
To view the current temperature of the power supplies, use the following command:
show powersupplies {detail}
ExtremeWare XOS 10.1 Concepts Guide
Description
Displays the previous page of ports.
Displays the next page of ports.
Exits from the screen.
Clears all counters.
Cycles through the following screens:
• Packets per second
• Bytes per second
• Percentage of bandwidth
Available using the show port utilization command only.
Temp (C)
--------
20.10
20.20
20.30
20.40
20.50
20.60
20.70
20.90
21.00
Port Monitoring Display Keys
show
95