Commands For Displaying And Configuring The System Message Logs - Brocade Communications Systems StoreFabric SN6500B Reference

Commands for displaying and configuring the system message logs

Table 3
commands require the admin access level. For detailed information on required access levels and
commands, refer to the Fabric OS Command Reference.
TABLE 3
Command
auditCfg
auditDump
errClear
errDelimiterSet
errDump
errFilterSet
errModuleShow
errShow
pdShow
portErrShow
portLogClear
portLogDisable
portLogDump
portLogDumpPort
portLogEnable
portLogEventShow
portLoginShow
portLogPdisc
portLogReset
Fabric OS Message Reference
53-1002749-01

Commands for displaying and configuring the system message logs

IF-MIB: YES
BD-MIB: YES
SW-TRAP: YES
swFault: YES
swSensorScn: YES
swFCPortScn: YES
swEventTrap: YES
swFabricWatchTrap: YES
swTrackChangesTrap: YES
swIPv6ChangeTrap: YES
swPmgrEventTrap: YES
swFabricReconfigTrap: YES
[...]
describes commands that you can use to view or configure the system message logs. Most
Commands for viewing or configuring the system parameters and message logs
Description
Configures the audit message log.
Displays or clears the audit log.
Clears all error log messages for all switch instances on this control processor (CP).
Sets the error log start and end delimiter for messages pushed to the console.
Displays the entire error log, without page breaks. Use the -r option to show the
messages in reverse order, from newest to oldest.
Sets an error severity filter for the system console.
Displays all the defined error log modules.
Displays the entire error log, with page breaks. Use the -r option to show the messages
in reverse order, from newest to oldest.
Displays the contents of the panic dump and core dump files.
Displays the port error summary.
Clears the port log. If the port log is disabled, this command enables it.
Disables the port log facility.
Displays the port log, without page breaks.
Displays the port log of the specified port, without page breaks.
Enables the port log facility.
Displays which port log events are currently being reported.
Displays port logins.
Sets or clears the debug pdisc_flag.
Enables the port log facility.
DesiredSeverity:Informational
DesiredSeverity:Critical
1
13