Position Of The Deck Pickup Solenoid (Sl101); Removing The Deck Driver Pcb; Electrical System; Removing The Deck - Canon CLC 1120 Service Manual

CHAPTER 10 PAPER DECK
8. Position of the Deck Pickup
Solenoid (SL101)
Take note of the positions of the two fixing
screws [2] on the solenoid [1] with reference to
the graduations on the support plate before
removing the solenoid. Or, mark the position of
the solenoid with a scriber on the support plate.
If you are mounting the solenoid on its
own, be sure to secure it in place where it was
before removal.
E. Electrical System

1. Removing the Deck Driver PCB

1) Disconnect the deck from the copier; then,
remove the six screws, and detach the rear
cover.
2) Disconnect the seven connectors [1], and
remove the four screws [2]; then, detach
the deck driver PCB [3].
10-38
COPYRIGHT © 1999 CANON INC.
[2]
[1]
[2]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
Figure 10-347
[1]
[1]
[1]
Figure 10-348
[2]
[2]