Removing The Slide Resistor; Cassette Pickup Solenoid; Before Removing The Cassette Pickup Solenoid; Removing The Cassette Pickup Solenoid - Canon iR3245 Series Service Manual

1) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
2) Remove the right cover. (page 10-37)Reference[Removing the Right
Cover]
3) Remove the manual feed unit. (page 8-36)Reference[Removing the
Manual Feed Unit]
4) Remove the manual feed tray unit. (page 8-35)Reference[Removing the
Manual Feed Tray Unit]

8.8.11.2 Removing the Slide Resistor

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Release the 2 claws [1] to detach the cover [2].
[2]
2) Detach the manual feed tray upper cover [2].
- 2 screws [1]
Be sure to mark the side registration position before detaching the manual
feed tray upper cover.
3) Remove the slide resistor [1].
- 1 connector [2]

8.8.12 Cassette Pickup Solenoid

8.8.12.1 Before Removing the Cassette Pickup Solenoid

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
[1]
F-8-57
F-8-58
F-8-59
1) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
2) Release the right cover. (page 10-36)Reference[Releasing the Right
Cover]
3) Remove the right cover (lower front). (page 10-16)Reference[Remov-
ing the Right Cover (Lower Front)]
4) Remove pickup unit 1. (page 8-30)Reference[Removing the Pickup
Unit 1]
5) Remove pickup unit 2. (page 8-30)Reference[Removing the Pickup
Unit 2]
0018-9854

8.8.12.2 Removing the Cassette Pickup Solenoid

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the cassette pickup solenoid [3].
- 1 connector [1]
- 1 screw [2]

8.8.13 Manual Tray Assembly

8.8.13.1 Before Removing the Manual Feed Tray Unit

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Remove the rear right cover. (page 10-16)Reference[Removing the
Rear Right Cover]
2) Remove the right cover. (page 10-37)Reference[Removing the Right
Cover]
3) Remove the manual feed unit. (page 8-36)Reference[Removing the
Manual Feed Unit]

8.8.13.2 Removing the Manual Feed Tray Unit

iR3225 / iR3225N / iR3235 / iR3235N / iR3245 / iR3245N
1) Disconnect the connector [1].
2) Remove the tie-wrap [2].
0018-9855
Chapter 8
F-8-60
F-8-61
0018-9856
0018-9859
0018-9860
8-35