CHAPTER 7 PICK-UP / FEEDING SYSTEM
H. Duplexing Delivery
Assembly (CLC1150 only)
1. Removing the Duplexing Delivery
1) Remove the left upper cover and the left
2) Remove the delivery upper cover.
3) Remove the nine screws , and
disconnect the two connectors .
4) Slide out the delivery unit slowly to
2. Position of the Delivery Assembly
Paper Deflecting Plate Drive
1) Remove the delivery assembly.
2) Place the delivery assembly on its end on
a level surface.
3) Loosen the adjusting screw  to make
adjustments while keeping the paper
deflecting plate  butted against the
delivery upper guide  when the
solenoid  is on while viewing from the
rear of the delivery assembly.
COPYRIGHT © 1999 CANON INC.
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)