Canon CLC 1120 Service Manual page 524

IV. SCHEDULED SERVICING LIST
A. Copier
Caution:
Do not use solvents or oils other than those listed.
Clean
Unit
Externals and Copyboard glass
controls Copyboard cover
Ozone filter
Air filter
Toner filter
Original Original reflecting cover
exposure No. 1 through No. 3 mirrors, Lens
Scanner rail
Pickup/ Attraction, registration
feeding spring clutch
Attraction roller
Attraction roller cleaner pan
Registration roller
Pre-registration roller 2
Pre-registration roller 1
Registration path middle guide
Pickup vertical path roller
Transfer Transfer drum cleaner
drum Jam sensor metal plate
(resin tape used for No.2
static eliminator mount)
Jam sensor metal plate
(polishing roller motor
mounting plate)
Laser exposure Dust-proofing glass
Charging Charging wire, shielding
plate, block
Separation, external static
eliminating wire
COPYRIGHT © 1999 CANON INC.
Replace Lubricate
Part
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 12 MAINTENANCE AND SERVICING
Adjust Inspect
Intervals
every every every
20,000
25,000 40,000
As of February 1999
Remarks
every
50,000
Use alcohol.
Or, 1 yr.
Or, 1 yr.
Or, 1 yr.
Use blower brush.
After cleaning, apply
silicone oil.
Use lubricant.
Remove unit, and clean.
Remove unit, and clean.
Remove unit, and clean.
Remove unit, and clean.
Clean the guide surface
Apply lubricant to the
busihg of the brush.
Clean with lint-free paper;
then, clean with alcohol. Be
sure the part is completely
dry before mounting.
Do not use water.
For low humidity and high
temperature/high humidity,
Clean every 20,000.
12-7