Supplying The Starter Developer - Canon CLC 1120 Service Manual

12) Press 'FUNCTION'.
13) Press 'INSTALL'.
14) Press 'HP-STR-4'.
Caution:
Be sure to wait until the indication on the
control panel is 'READY' before
executing HP-STR-4 in service mode.
15) Press 'OK'.
16) Wait until the toner (4 colors) inside the
hopper has been stirred fully (about 2 min).
F. Supplying the Starter
Developer
1) Press 'SPLY-K'.
Caution:
Be sure to wait until the indication on the
control panel is 'READY' before
executing SPLY-K in service mode.
2) Press 'OK'.
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
11-19