Canon CLC 1120 Service Manual page 338

CHAPTER 7 PICK-UP / FEEDING SYSTEM
4) Remove the screw [4], E-ring [5] (inside
the shaft 1), and shaft connecting member
[6]; then, detach the gear unit 1 [7]
together with its shaft.
5) Remove the two E-rings [8] (outside the
shaft 2) and the screw [9], and disconnect
the connector [10]; then, remove the
polishing roller motor unit [11].
7-96
COPYRIGHT © 1999 CANON INC.
[8]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[4]
Figure 7-861
[11]
[9]
Figure 7-862
[7]
[6]
[5]
[8]
[10]