Canon CLC 1120 Service Manual page 475

7) Supply M, C, and Y starter developers by
repeating steps 1) through 6). (Press
SPLY-M, SPLY-C,
accordingly.)
8) Turn the hopper unit slowly, and push
down the hopper stopper so that the roll on
the left of the hopper is on the rail.
Here, do NOT push in the hopper unit to
lock it in position as yet.
Caution:
Do no handle the hopper unit roughly.
Otherwise, large amounts of toner will
drop from the hopper assembly.
9) Press 'STIR-4'.
Caution:
Be sure to wait until the copier indicates
'READY' on its control panel before
executing STIR-4 in service mode.
10) Press 'OI', and wait until stirring ends
(about 10 min).
11) Press 'INIT-4'.
Caution:
Wait until the copier indicates 'READY'
on its control panel before executing
'INIT-4' in service mode.
COPYRIGHT © 1999 CANON INC.
or SPLY-Y
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 11 INSTALLATION
11-21