1. Removing the Flywheel
The copier's flywheel weighs a total of
13 kg, consisting of a 8-kg flywheel and
a 5-kg flywheel. Take full care not to
drop it, and be sure to hold it on its right
and left as shown when handling it.
1) Remove the rear cover.
2) Turn the flywheel counterclockwise so
that it is as shown in the figure.
Do NOT turn the flywheel clockwise.
Otherwise, it will damage the cleaning
blade, causing cleaning faults.
3) Remove the two screws , and detach
the flywheel 1 .
4) Remove the two screws , and detach
the flywheel 2 .
2. Points to Note When Handling the
The flywheel 1/2 has its face and its back.
Be sure to mount it so that the weight caution
label is in view (toward the rear cover).
COPYRIGHT © 1999 CANON INC.
CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)