Canon CLC 1120 Service Manual page 839

CHAPTER 13 TROUBLESHOOTING
Level 3
CONTROL 2 For CC-X
The device* total counter is incremented under all
conditions; i.e., disabling control key, control
card, or ID No. input with conditions.
In the case of '3' or '4' for black-and-white copying
without a card, the CC-V card counter will not be
incremented.
In the case of '2', '3', or '4' for remote printing
without a card, the CC-X card counter will not be
incremented.
In the case of '2' or '4' for remote printing, the CC-
X card counter will be incremented regardless of
the presence/absence of a CC-X card.
3 With ID No. Registration in Use
For '3' or '4' for black-and-white copying without
an ID No. input, the counter for the group in
question for the ID. No. will not be incremented.
For '2', '3', or '4' for remote printing without an ID
No. input, the counter for the group in question for
the ID No. will not be incremented.
For '2' or '4' for remote printing, the counter for
the group in question for the ID No. will not be
incremented regardless of the presence/absence of
an ID No. or password input.
Example
· When CONTROL is set to '2',
In the absence of a control key, remote printing
and remote scanning are possible.
In the absence of a control card, no job is possible.
In the absence of an ID No. input, no job is
possible.
· When CONTROL is set to '421',
In the absence of a control key, only remote
scanning is possible.
In the absence of a control card, remote printing
and remote scanning are possible.
In the absence of an ID No. input, black-and-white
copying, remote printing, are remote scanning are
possible.
COLDOFST for R&D
MONO-SPD for R&D
13-312
COPYRIGHT © 1999 CANON INC.
Description
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Remarks
* copy data controller or
remote diagnostic device.