Canon CLC 1120 Service Manual page 807

CHAPTER 13 TROUBLESHOOTING
Level 3
NEGA-B Use it to adjust the target value for shading
NEGA-G correction when copying negative film with the
NEGA-R projector in use.
POSI-B Use it to adjust the target value for shading
POSI-G correction when copying positive film with the
POSI-R projector in use.
N-LMT Use it to change the limit for the projector lamp in
negative normal mode with the projector in use
N-G-LMT Use it to change the limit for the projector lamp in
negative copyboard mode with the projector in use.
P-LMT Use it to change the limit for the projector in positive
normal mode with the projector in use.
P-G-LMT Use it to change the limit for the projector in positive
copyboard mode with the projector in use.
OHP-LMT Use it to change the limit for the projector in
transparency mode with the projector in use.
P-DA-XS Use it to adjust the degree of the positive film
P-DA-XE original frame erasing mechanism with the projector
P-DA-YS in use.
P-DA-YE
N-DA-XS Use it to adjust the degree of negative film original
N-DA-XE frame erasing mechanism with the projector in use.
N-DA-YS
N-DA-YE
O-DA-XS Use it to adjust the degree of transparency film
O-DA-XE original erasing mechanism with the projector in
O-DA-YS use.
ODAS-YE
CHNGR-X Use it to adjust the position in main scanning
direction with the projector rotary changer in use.
CHNGR-Y Use it to adjust the position in sub scanning direction
with the projector rotary changer in use.
13-280
COPYRIGHT © 1999 CANON INC.
Description
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
PRJ>ADJUST
Remarks
-100 to +100
A higher value darkens the
color.
B Y
G M
R C
0 to 255
-99 to +99
Unit: 0.6 mm (approx.)
Standard:
XS=24
XE=8
YS=32
YE=24
-99 to +99
Unit: 0.6 mm (approx.)
Standard: 50
-99 to +99
Unit: 0.6 mm (approx.)
Standard:
XS=24
XE=8
YS=32
YE=24
-99 to +99
Unit: 0.6 mm (approx.)
Standard: 0