Position Of The Deck Pickup; Solenoid (Sl101); Electrical System; Removing The Deck Driver Pcb - Canon 1130 Service Manual

CHAPTER 10 PAPER DECK

8. Position of the Deck Pickup

Solenoid (SL101)

Take note of the positions of the two fixing
screws [2] on the solenoid [1] with reference to
the graduations on the support plate before
removing the solenoid. Or, mark the position of
the solenoid with a scriber on the support plate.
If you are mounting the solenoid on its
own, be sure to secure it in place where it was
before removal.
E. Electrical System

1. Removing the Deck Driver PCB

1) Disconnect the deck from the copier; then,
remove the six screws, and detach the rear
cover.
2) Disconnect the seven connectors [1], and
remove the four screws [2]; then, detach
the deck driver PCB [3].
10-38
COPYRIGHT © 2002 CANON INC.
[2]
[2]
CANON CLC1100/1130/1150/1160/1180 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
[1]
Figure 10-347
[1]
[1]
[1]
[1]
Figure 10-348
[2]
[2]