Removing The Internal Static Eliminator; Removing The Separation Changing Assembly; Removing The Polishing Roller - Canon CLC 1120 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
7. Removing the Internal Static
Eliminator
1) Remove the transfer drum from the
transfer drum frame.
2) Turn the transfer drum to match the holes
in the plate at the rear of the transfer drum
and the holes in the transfer drum.
3) Remove the claw [1], and pull out the
internal static eliminator [2]
8. Removing the Separation
Changing Assembly
1) Pull out the transfer drum frame.
2) Remove the screw [1], and remove the
separation charging assembly [2].
Caution:
Be sure to use the initial screw (binding;
M4x6) when mounting the separation
charging assembly. The use of a longer
screw will result in irregular intervals.

9. Removing the Polishing Roller

1) Remove the transfer drum from the
transfer drum frame.
2) Push the transfer roller [1] toward the
front of the transfer drum to remove.
Caution:
Take care not to touch the transfer sheet.
7-94
COPYRIGHT © 1999 CANON INC.
[1]
[2]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
Figure 7-855
Figure 7-856
[1]
Figure 7-857
[1]