5) Remove the screw [7], and disconnect the
two connectors [8]; then, detach the black
hopper.
In the case of the magenta hopper, remove
the three screws [9]; then, detach the
support plate [10] and the drive belt [11]
in advance.
6) Remove the E-ring [12], gear 1 [13],
bushing [14], E-ring [15], E-ring [16],
and bushing [17], and disconnect the
connector [18] of the hopper driver
assembly; then, remove the clutch.
COPYRIGHT © 1999 CANON INC.
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[8]
[7]
Figure 6-662
[12]
[17]
[16]
Figure 6-663
[9]
[11] [9]
[10]
[13]
[14] [15]
[18]
6-77