Stacking Paper - Canon CLC 1120 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
B. Stacking Paper
When its side has been processed, copy paper is moved to the delivery vertical path assembly
as the delivery paper deflecting plate solenoid (SL10) turns on. Then, it is moved through the
duplexing path, and is turned over by the duplexing reversing roller.
At this time, the duplexing paper feed roller solenoid (SL13), stacking guide plate solenoid
(SL15), and stopper plate solenoid (SL12) in the duplexing tray assembly turn on; as a result, the
duplexing feed roller and the stacking guide plate move up, and the stopper plate shifts up to
prepare for the arrival of copy paper.
Each time copy paper arrives at the duplexing tray assembly, the duplexing paper feed roller
solenoid (SL13) turns off, and the duplexing paper feed roller moves down to the copy paper. At
the same time, the stacking guide plate solenoid (SL15) turns off so that the copy paper will not
curl, moving down the stacking guide plate to the copy paper. Thereafter, the duplexing paper feed
roller rotates each time the duplexing paper feed clutch (CL14) turns on, butting the copy paper
against the stopper plate.
Delivery paper
deflecting plate
solenoid
SL10
7-24
COPYRIGHT © 1999 CANON INC.
Duplexing motor
M14
Delivery vertical
path clutch
CL19
Figure 7-303
Duplexing
SL13
paper feed
roller solenoid
CL14
Duplexing
paper feed
clutch
Stacking guide
plate solenoid
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
SL15
SL12
Stopper plate
solenoid