Removing The Transfer Drum Frame - Canon CLC 1120 Service Manual

CHAPTER 7 PICK-UP / FEEDING SYSTEM
If you have replaced the transfer drum, be
sure to perform the following in service mode
(ADJUST>FED-ADJ; p. 13-2):
1. Attraction timing adjustment (ATT-T-A,
ATT-A-B)
2. Image leading edge margin adjustment
(RG-XA, RG-XB, RG-Y)
3. Attraction position adjustment (TR-
DELAY_A, TR-DELAY_B)
4. Image rear end adjustment (TR-END-A,
TR-END-B)
3. Removing the Transfer Drum
Frame
1) Slide out the transfer drum frame.
2) Remove the fixing assembly.
3) Remove the transfer drum.
4) Grasp the handles of the transfer drum
frame, and detach it.
Caution:
The transfer drum frame weighs about
10 kg. Take adequate care.
7-76
COPYRIGHT © 1999 CANON INC.
Wrong
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 7-806
Figure 7-807