Canon CLC 1120 Service Manual page 207

14) Place the photosensitive drum unit as
shown.
15) Place copy paper over the photosensitive
drum as shown.
16) Remove the screw [10], and remove the
fixing pin unit (right) [11].
17) Remove the three screws [12], and
remove the photosensitive drum butting
block (front) [13].
COPYRIGHT © 1999 CANON INC. CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
Figure 6-607
[10]
Figure 6-608
[12]
Figure 6-609
[11]
[13]
6-55