Canon CLC 1120 Service Manual page 816

Level 3
HP-STR-Y Use it to stir the toner inside a specific color hopper
HP-STR-M to prevent blocking at time of installation and hopper
HP-STR-C unit replacement.
HP-STR-K Using the Item
1) Select an item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 30
sec.
Note:
This item is designed to prevent blocking of toner
supplied to an empty hopper at high speed, as
occurring at time of installation or hopper unit
replacement.
HP-STR-4 Use it to stir the toner inside the four color hoppers to
prevent blocking at time of installation or hopper unit
replacement.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically in about 2
min.
Caution:
This item is designed to prevent blocking of toner
supplied to empty hoppers at high speed, as
occurring at time of installation or hopper unit
replacement.
INIT-D Use it to read the concentration sensor output data
once again after cleaning the black toner
concentration sensor to suit the light reflected by the
photosensitive drum.
Using the Item
1) Select the item (to highlight), and press the OK
key.
2) The operation will stop automatically.
INIT-P for R&D
COPYRIGHT © 1999 CANON INC.
Description
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 13 TROUBLESHOOTING
Remarks
13-289