Feeding System; Removing The Deck Pickup Unit; Removing The Deck Pickup Roller - Canon CLC 1120 Service Manual

CHAPTER 10 PAPER DECK
D. Feeding System

1. Removing the Deck Pickup Unit

1) Remove the upper cover.
2) Disconnect the two connectors [1], and
remove the five screws [2].
3) Remove the deck pickup unit [3].
Caution:
When mounting the deck pickup unit
[3], be sure to tighten the three screws
shown in the figure first.

2. Removing the Deck Pickup Roller

1) Remove the deck pickup unit.
2) Turn over the deck pickup unit, and
remove the resin ring [1] (one each); then,
remove the deck pickup roller [2].
10-34
COPYRIGHT © 1999 CANON INC.
[1]
[2]
CANON CLC1120/1130/1150 REV.0 MAR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2] [3]
Figure 10-337
[3]
Screws
Figure 10-338
[2]
[1]
Figure 10-339
[2]
[2]